+86 139 3327 5152
01/ Jul. 16, 2021
Features and Applications of Induction Heating Equipment Before the advent of induction heating technology, metals and non-metals were heated by devices using gas or oil as energy sources. Compared with these two traditional heating devices, induction heating technology has many significant features. learn more
02/ Jul. 09, 2021
Why are impeders needed for induction welding? Impeders dramatically improve the efficiency of the welding process by directing more energy towards the edges of the strip. The high frequency magnetic field created by the work coil induces a current which flows around the outer surface of the tube. learn more
03/ Jun. 28, 2021
Principle and Use of Solid State High Frequency Welding Machine Solid state high frequency welder can not only heat the workpiece as a whole, but also target the local heating of the workpiece; it can realize the deep penetrating heat of the workpiece, and also focus on the heating of its surface and surface layer only learn more
04/ Jun. 25, 2021
Cooling considerations for impeders (Ferrite Rods) for HF welding Impeders require cooling for several reasons. The most obvious one is that they operate in close proximity to hot material however this only contributes a small fraction of thetotal heat which must be removed by the cooling medium. learn moreBaoding Chaochang Electromechanical Co., Ltd.
Copyright © Baoding Chaochang Electromechanical Co., Ltd. All Rights Reserved | Sitemap
